VELOCE 100 GW

The Dalbello Veloce 100 GW is a ski boot with traditional Overlap construction, built for piste skiers looking for precision and direct ski control. Its bi-injected shell is softer at the top for easier entry and exit, and stiffer at the bottom for accurate power transmission on every turn. With a flex of 100, it suits intermediate to advanced skiers who want a demanding boot that's still comfortable to put on.

Contour 5 technology pre-maps the usual pressure zones so a bootfitter can work on them without damaging the shell, while the MyFit System lets you heat-mold the shell and liner independently for a fully personalized fit. The 4 frictionless V22 W buckles, together with the 40 mm Power Strap, provide a firm, even closure, and the pre-mounted GripWalk soles make walking safe both on and off piste.

FEATURES

• Traditional two-piece Overlap construction, built for precision piste skiing
• Bi-injected shell (soft on top, stiff at the bottom) for easy entry and precise control
• Contour 5 technology with pre-mapped zones ready for bootfitter adjustment
• 4 frictionless V22 W buckles, easy closure and even pressure distribution
• 40 mm Power Strap for extra support around the cuff
• MyFit System: independently heat-moldable shell and liner
• Pre-mounted GripWalk soles (ISO 23223) for safer walking
• Heat-moldable Veloce IF Sport liner with thermal insulation

SPECIFICATIONS

GENDER

Men

FLEX

100

SIZING

24.5 to 30.5 Mondopoint

LAST WIDTH

100 mm

NUMBER OF BUCKLES

4 frictionless V22 W buckles, easy closure

COMPATIBILITY

GripWalk (ISO 23223)

USE

Piste / All Mountain, intermediate to advanced level

MATERIAL

SHELL

Bi-injected PU, Overlap construction with Contour 5 technology

INNER LINER

Veloce IF Sport, heat-moldable, thermally insulated

SOLE

Pre-mounted GripWalk (ISO 23223)

APPROX. WEIGHT: 1,925 g PER BOOT (Size 26.5 Mondopoint)

TECHNICAL INFORMATION

• Overlap construction - the traditional build system in which the shell wraps around the liner in two overlapping pieces, without the extra divisions found in Cabrio designs. This layout transmits the skier's power directly to the ski and gives maximum precision in edge control, especially on piste. It's the construction of choice for skiers who prioritize immediate response over the easy-entry comfort of a three-piece system.
• Bi-injected shell with Contour 5 technology - combines two plastic densities in a single piece: softer at the top of the cuff for easier entry and exit, stiffer at the bottom of the shell for precise power transmission. Contour 5 technology adds pre-mapped zones at common pressure points (navicular, ankle bones, fifth toe), ready for a bootfitter to work without damaging the structure. The result is a boot that fits the foot better from the first use, without losing the stiffness needed for demanding skiing.
• MyFit System - Dalbello's heat-molding technology that lets the shell and liner be molded independently, each with its own heating process. A bootfitter warms the material in-store and shapes it to the skier's exact foot anatomy, correcting pressure points without changing size or model. By treating shell and liner separately, the final fit is more complete than systems that only heat-mold the liner.
• V22 W buckles - the boot's 4 closure buckles, designed to work without friction thanks to a dedicated lower interaxle that smooths the closing motion. This allows even pressure adjustment across the instep and cuff without the buckle sticking or needing extra force. The result is a fast, comfortable closure that's easy to operate even with cold hands or gloves.
• GripWalk soles (ISO 23223) - curved, non-slip soles pre-mounted at the factory and certified under the ISO 23223 standard, significantly improving grip when walking on hard, wet, or icy surfaces. Their raised toe and heel profile mimics a natural walking gait, reducing the risk of slipping off the slope. A solution built for everyday piste use, where skiers walk short distances between the parking lot, the café, and the lifts.
• Veloce IF Sport liner - the heat-moldable inner liner of the Veloce range, with thermal insulation to keep feet warm on the coldest days. Its heel-wrap zone holds the foot firmly and prevents slipping during flex, while the higher-volume toe box improves blood circulation and comfort. Compatible with the MyFit System, it can be heat-molded in-store for a more personalized fit.
• 40 mm Power Strap - an additional velcro strap placed at the top of the cuff, reinforcing the closure of the top buckle and distributing pressure more evenly across the calf. It helps improve power transmission to the lower shell without needing to over-tighten the aluminum buckles. It's a common addition on boots built for intensive piste use, where the goal is maximum control without sacrificing comfort.