VELOCE 90 MV

The Dalbello Veloce 90 MV is a ski boot with Overlap construction and a bi-injected PU shell, built for skiers who want a comfortable fit from day one without giving up good control on piste. The shell is softer at the top for easier entry and exit, and stiffer at the bottom for precise power transmission. With a flex of 90, it's especially approachable for beginner to intermediate skiers progressing toward more dynamic skiing.

The DB Hyperlight cuff cuts overall weight without losing support, and Contour 5 technology pre-molds the foot's common pressure points, marked with a 3D texture on the shell. The 4 micro-adjustable aluminum buckles close with ease, and the 40 mm Power Strap reinforces the hold around the cuff. The Veloce Sport liner is heat-moldable thanks to the MyFit System, and the pre-mounted GripWalk soles make walking safe both on and off piste.

FEATURES

• Traditional 4-buckle Overlap construction with bi-injected PU shell (soft on top, stiff at the bottom)
• DB Hyperlight cuff that provides support without excess weight
• Contour 5 technology with 3D texture at fit points
• 4 micro-adjustable aluminum buckles with easy closure
• 40 mm Power Strap for extra support around the cuff
• MyFit System: independently heat-moldable shell and liner
• Veloce Sport liner with good heel support and thermal insulation
• Pre-mounted GripWalk (ISO 23223) soles

SPECIFICATIONS

GENDER

Men

FLEX

90

SIZING

22.5 to 30.5 Mondopoint

LAST WIDTH

100 mm

NUMBER OF BUCKLES

4 micro-adjustable aluminum buckles, easy closure

COMPATIBILITY

GripWalk (ISO 23223)

USE

Piste / All Mountain, beginner to intermediate level

MATERIAL

SHELL

Bi-injected PU, Overlap construction with DB Hyperlight cuff and Contour 5 technology

INNER LINER

Veloce Sport, heat-moldable

SOLE

Pre-mounted GripWalk (ISO 23223)

APPROX. WEIGHT: 1,920 g PER BOOT (Size 26.5 Mondopoint)

TECHNICAL INFORMATION

• Overlap construction with bi-injected shell - the two-piece build system that combines two PU densities in a single shell: softer at the top for easier entry and exit, stiffer at the bottom for precise power transmission from skier to ski. This setup offers a good balance between step-in comfort and control, ideal for skiers starting to demand more from their gear. The result is a boot that's easy to live with day to day without losing the response needed on piste.
• DB Hyperlight cuff - the lightweight cuff material Dalbello fits on the Veloce range to cut the boot's overall weight without losing lateral support. By lightening the upper part of the boot, it becomes easier to move through every direction change, especially on long days of learning or progression. It's a component built for skiers who prioritize comfort without giving up a minimum of hold.
• Contour 5 technology - pre-molds the shell and liner at several common foot pressure points, marking those zones with a visible 3D texture on the outside of the shell. This clearly shows a bootfitter where to work the material to personalize the fit without damaging the structure. The result is a boot that fits the foot's anatomy better from the first use, reducing the discomfort typical of early outings.
• Micro-adjustable aluminum buckles - the boot's 4 closure buckles, with a micrometric adjustment mechanism that lets you lengthen or shorten the buckle with a simple turn to fine-tune pressure. Their easy-close design reduces the effort needed to tighten them, which is especially useful for skiers still getting used to handling ski boots. The resulting closure is firm yet comfortable to operate every day.
• 40 mm Power Strap - an additional velcro strap at the top of the cuff that reinforces the closure of the top buckle and distributes pressure more evenly across the calf. It helps improve power transmission to the lower shell without needing to over-tighten the aluminum buckles. It's a common feature on piste-use boots where extra hold is wanted without sacrificing comfort.
• MyFit System - Dalbello's heat-molding technology that lets the shell and liner be molded independently, each with its own in-store heating process. A bootfitter shapes the material to the skier's exact foot anatomy, correcting pressure points without changing size or model. By treating shell and liner separately, the final fit is more complete than systems that only heat-mold the liner.
• Veloce Sport liner - the heat-moldable inner liner of the Veloce range, with a heel-hold zone that prevents the foot from slipping during flex. It provides good thermal insulation to keep feet warm on cold days, without being overly bulky. Compatible with the MyFit System, it can be heat-molded in-store for a more personalized fit.
• GripWalk soles (ISO 23223) - curved, non-slip soles pre-mounted at the factory and certified under the ISO 23223 standard, significantly improving grip when walking on hard, wet, or icy surfaces. Their raised toe and heel profile mimics a natural walking gait, reducing the risk of slipping off the slope. A solution built for everyday piste use, from the parking lot to the lifts.